In order for your 3CX PBX is able to answer PnP requests for provisioning purposes the following requirements must be met: 3CX must run on SIP Port 5060 3CX must be able to join the multicast group The IP Phone and PBX must be in the same local LAN subnet Switch must support MultiCast Your
Introduction In this document we are going to demonstrate how to create a bridge between a 3CX (V14) and an Asterisk PBX. We will assume both systems are in the same local LAN. Setting up 3CX From the 3CX Management Console go to “Bridges” and “Add Bridge”. In the “Add Bridge” form fill
Migrating from one PBX to another is not an easy task. It usually takes a lot of time for the Administrator to set up the new PBX to include all the extensions and users that the previous PBX had. The good news is that if you’re migrating from an Asterisk to 3CX we’ve made this
We encounter IP systems for audio distribution every day in many places, without even realising the fact. Every time we enter a department store or bank, when waiting for a train or travelling by metro, we can hear music, advertising messages and information about train arrivals and departures played over various audio systems. You can
3CX Phone System has a built-in automated firewall checker which validates the setup of your firewall in terms of “port forwarding” and also “port preservation”. Port Forwarding 3CX Phone System will check if “Full Cone NAT” is correctly set up on the firewall/gateway device. Full Cone NAT allows any external entity to connect to 3CX
Customizing Ring Tones in Fanvil IP Phones If you want to change the ring tone on your Fanvil IP Phones, you can update new ring yourself by following the below instructions and method: File format must be “wav”, or you should transfer the music format to be wav and not more than 1 MB of
There has been a tremendous change in the technology of door intercom starting from analogue to Digital and to IP. We have the latest Integrated IP based Door Intercom devices which also allows you to integrate your door intercom devices to your IP-PBX and extended the usability of it from any IP Phone or extension
Dial codes are key/number combinations used to access functions within the phone system directly from a phone. The administrator can change these from the “3CX Management Console” > “Settings” > “Advanced” > “Dial codes” tab. This article will describe the default dial-codes. Call Pick-up If you hear a particular extension ringing, and you know that person
You can manage your Voicemail using any Desk Phone by dialing “999” (3CX Phone System default). A voice menu system will ask you to enter your Personal Identification Number (PIN) followed by “#”. The initial options you are presented with, are the following: Dial * to play your messages. Dial “9” to go to options. Dial pound “#”
Conference calls allow you to easily setup a call between multiple users – up to 32 callers (license permitting). Although many conference call services exist, it’s often easier and cheaper to host your own audio conferences. You can set-up Ad-hoc conference calls, without the need to reserve a conference room. This has been done to
